HSR Series Pumps – 5 HP – 30HP – (100 mm to 150 mm)

HSR Series Pumps – 5 HP – 30HP – (100 mm to 150 mm)

HSR Series Pumps – 5 HP – 30HP – (100 mm to 150 mm)

Pump                                                            SUBMERSIBLE SLURRY PUMP
Type                                                                           SLURRY PUMP
Model      HSR 05      HSR 07 HSR 10     HSR 15 HSR 20       HSR 25       HSR 30
Motor Rating (HP/kW) 5/3.7 7.5/5.5 10/7.5 15/11 20/15 25/18.26 30/22
Speed (rpm) 1450 1450 1450 1450 1450 1450 1450
Rated Current @ 380 V (amps) 9 15 18 26 35   42 48
Rated Current @ 415 V (amps) 8 13 16 24 32 38 44
Rated Current @ 460 V (amps) 7 11 14 22  29  34  37
Rated Current @ 575 V (amps) 6  9 11 17  23 27  32
Max Solid Size Handling (mm)         15         15 15 25  25 25 25
Outlet (mm)        100        100 100 150 150 150 150
Height (mm / Inches) 840 850 860 1050 1060 1080 1100
Weight (Kg / lbs) 160 172 190 340 360 370 650
Max Head (mtrs.) 14 16 19 26 30 34 38
Max Discharge (lpm) 1300 1750 2100 2500 2800 3000 4500
Max Discharge M3/hr 96 108 144 150 180 210 216

MOTOR

4-pole induction continuous rated motor with squirrel cage rotor.
Stator insulation class ‘H’ (180oC) / “F” class Insulation
Speed : 1450 RPM @ 50 Hz / 1800 RPM @ 60Hz
Power Rating : 5 HP – 30HP @ 50 Hz, 3.7 – 22kW
Max. temperature of the pump liquid : 104°F/40°C
Max. start/stop per hour : 15

POWER SUPPLY

3 phase, 50/60 Hz, AC Supply.
Available in any voltage frequency combination. ( 380/415/460/575/1000 )
Moisture sensor available in 3 Phase configurations only with thermal protection

BALL BEARINGS

Rotor shaft is carried in two single rows, deep groove ball bearings.
Bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE

Waterproof/ Oil proof, PVC insulated, double sheathed copper conductor flexible cable, 15 metres length

SHAFT SEAL

Double Silicon Carbide / Silicon Carbide

ABRASION & CORROSION RESISTANT

Stator Casing: Graded C.I
Wear plate: Hi-Chromium Alloy / Ni-Hard
Shaft: 431 Stainless Steel
Hardware: 316 Stainless Steel
Impeller: Hi-Chromium Alloy / Ni-Hard
Volute: 2% Ni-CI/Hi-Chromium Alloy
Agitator – Hi-Chromium Alloy / Ni-Hard

Cross Section

Performance Curve